Analisa Tegangan dan Safety Factor Pada Design Poros Mesin Crusher Untuk HDPE Kapasitas 0.2646 Kg/min

Authors

  • Sandya Gilang Samudra Politeknik Digital Boash Indonesia
  • Oscar Haris Politeknik Digital Boash Indonesia

DOI:

https://doi.org/10.66865/j25pc283

Keywords:

Tegangan , Safety Factor , Poros, Simulasi, Design

Abstract

Crusher and extruder machines for HDPE plastic materials are used as high density polyethylene (HDPE) plastic waste processing machines to produce plastic pellets. In designing the shaft, it is an important element in the construction of the crusher machine to transmit motor power through the pulley. Based on the design calculation results, the shaft diameter is 30 mm with a length of 392 mm and the shaft torsional moment is 6678.85 Kg.mm. The design results, stress and safety factor in the Finite Element Method (FEM) Solidworks simulation. The research purposes is to avoid shaft design failure. The shaft with AISI 1045 material is the most suitable for the required requirements with a safety factor value of 1.6675 with a maximum known stress value of 315,939,328 N/m2

Downloads

Published

2025-04-29

Issue

Vol. 2 No. 1 (2025): April 2025

Section

Articles

License

Copyright (c) 2025 Sandya Gilang Samudra, Oscar Haris

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Authors who publish with Jurnal Mema (Jurnal Mesin dan Manufaktur) agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License (CC BY-SA 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal. 
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.


Jurnal Mema (Jurnal Mesin dan Manufaktur) is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.